價格：免費
更新日期：2015-11-25
檔案大小：因裝置而異
目前版本：因裝置而異
版本需求：Android 因裝置而異
官方網站：http://www.dtadroid.com
Email：dtadroid@dtadroid.com
聯絡地址：29 Longfield Road Leamington Spa CV32 1XB
DTADroid Pro is a simple to use dashboard that displays information from any DTA S-Series ECU. The supported values from the ECU are:
RPM
Throttle %
Water Temp
Air Temp
Manifold Pressure
Lambda
Battery Voltage
Undriven Wheel Speed
Oil Pressure
Fuel Pressure
Oil Temperature
In addition, gauges show data from the phone, including GPS speed.
DTADroid has been carefully designed to support all device sizes from phones to tablets, with layouts optimised to suit your particular device's screen size.
To connect the app to the ECU, you will require:
- A 15 pin to 9 pin RS232 cable to connect to the ECU
You will also require either:
- A Serial to USB cable. Both FTDI and Prolific chipsets are supported.
- A Bluetooth to RS232 adapter, such as the BTLink BTL-577. Please note that there is currently an issue where the BT dongle will not connect if the ECU is plugged in to the dongle. We are working on a fix for this.
There are some setup changes required for DTADroid to communicate with the ECU. Please see our Getting Started page at http://dtadroid.com/getting-started/